Reliability and Availability Analysis of a Single Unit System with Varying Demand
DOI:
https://doi.org/10.15415/mjis.2013.21006Keywords:
Variation in demand, Mean Time to System Failure, AvailabilityAbstract
This paper investigates the reliability and availability analysis of a single unit system in an industry, depending on the variation in demand. Variation in demand affects the production also and hence the system may go to down state when the units produced are in excess. The system in the downstate is made operative as soon as the produced units are less in number than those demanded. Using regenerative point technique, Mean Time to System Failure, the Availabilities in both the cases i.e. when demand is greater than or equal to production and when demand is less than production has been obtained.
Downloads
References
Attahiru Sule Alfa W.L. and Zhao, Y.Q. (1998); Stochastic analysis of a repairable system with three units and repair facilities. Microelectron. Reliab., 38(4), 585-595. http://dx.doi.org/10.1016/S0026-2714(97)00204-7
Kumar, A., Gupta, S.K. and Taneja, G. (1995); Probabilistic analysis of a two-unit cold standby system with instructions at need. Microelectron. Reliab., 35(5), 829-832. http://dx.doi.org/10.1016/0026-2714(94)00099-A
Mathew, A.G., Rizwan, S.M., Majumder, M.C., Ramachandran, K.P. and Taneja, G.(2011); Reliability analysis of an identical two-unit parallel CC plant system operative with full installed capacity, International Journal of Performability Engineering 7(2), 179-185.
Parashar, B. and Taneja, G. (2007); Reliability and profit evaluation of a PLC hot standby system based on a master-slave concept and two types of repair facilities, IEEE Transactions on Reliability, 56(3), 534-539. http://dx.doi.org/10.1109/TR.2007.903151
Taneja, G. and Naveen V. (2003); Comparative study of two reliability models with patience time and chances of non-availability of an expert repairman, Pure and Applied Mathematika Sciences, LVII (1-2), 23-35.
Taneja, G. and Nanda, J. (2003); Probabilistic analysis of a two-unit cold standby system with resume and repeat repair policies, Pure and Applied Mathematika Sciences, LVII (1-2), 37-49.
Taneja, G. Tyagi, V.K. and Bhardwaj, P. (2004); Profit analysis of a single unit programmable logic controller (PLC), Pure and Applied Mathematika Sciences LX (1-2); 55-71.
Downloads
Published
How to Cite
Issue
Section
License
Articles in Mathematical Journal of Interdisciplinary Sciences (Math. J. Interdiscip. Sci.) by Chitkara University Publications are Open Access articles that are published with licensed under a Creative Commons Attribution- CC-BY 4.0 International License. Based on a work at https://mjis.chitkara.edu.in. This license permits one to use, remix, tweak and reproduction in any medium, even commercially provided one give credit for the original creation.
View Legal Code of the above mentioned license, https://creativecommons.org/licenses/by/4.0/legalcode
View Licence Deed here https://creativecommons.org/licenses/by/4.0/
 |
Mathematical Journal of Interdisciplinary Sciences by Chitkara University Publications is licensed under a Creative Commons Attribution 4.0 International License. Based on a work at https://mjis.chitkara.edu.in |
